Operation; Zeroing The Display; Taring - Adam Equipment AZ extra Serie Manual De Instrucciones

EN

3.0 OPERATION

3.1

ZEROING THE DISPLAY

• You can press the [Zero] key when no tare is entered to set the zero
point from which all other weighing is measured. This will usually be
necessary when the platform is empty.
• When the zero point is obtained the Weight window will show an
arrow next to the Zero legend marked under the Weight window.
• The scale has an automatic re-zeroing function to account for minor
drifting or accumulation of material on the platform. However you may
need to press [Zero] to re-zero the scale if small amounts of weight
are shown when the platform is empty.
3.2

TARING

• Taring is used to eliminate the weight of a container so that only the
net weight is displayed.
• Zero the scale by pressing [Zero] if necessary. The zero indicator will
be on.
• Place an empty container on the platform. The weight of the container
will be displayed.
• Press [Tare] to zero the scale. The weight that was displayed is stored
as the tare value and that value is subtracted from the display, leaving
zero on the display. The Net indicator will be on. As product is added
only the weight of the product will be shown.
• When the product and container are removed the weight window will
show a negative value. If a different container is to be used, remove
this negative tare value by pressing the [Tare] once more.
© Adam Equipment Company 2011 7