Description Of The Inputs And Outputs; Rf Input; Ts-Asi Input / Output; Usb Port - Promax TV EXPLORER HD+ Manual De Instrucciones

Explorador universal de tv
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

USER'S MANUAL. TV EXPLORER HD+

6 DESCRIPTION OF THE INPUTS AND OUTPUTS

6.1

RF input

The RF input is through the RF
signal level should never exceed 130 dBμV.
6.2

TS-ASI Input / Output

The TS-ASI input / output signals works through the connectors
[43] (input) at the rear panel.
6.3

USB port

The TV EXPLORER
enables the communication with a PC so user can download dataloggers and channel
plans.
The "USB On-the-go" makes it possible for two USB devices to communicate with
each other without requiring a separate USB host. In practice, one of the USB devices
acts as a host for the other device.
Figure 77.- "USB On-the-go" connector at the rear panel. External view.
6.4

HDMI Conector (High-Definition Multimedia-Interface)

HDMI (High-Definition Multimedia Interface) is a compact audio/video interface for
transmitting uncompressed digital data. HDMI supports, on a single cable, any TV or PC
video format, including standard, enhanced, and high-definition video; up to 8 channels
of digital audio; and a Consumer Electronics Control (CEC) connection. The CEC allows
HDMI devices to control each other when necessary and allows the user to operate
multiple devices with one remote control handset.
Figure 78.- HDMI Connector at the rear panel. External view.
11/2013
[30] connector on the side panel. The peak
HD+
incorporates an "USB On-the-go" port [40], which
[42] (output),
Page 103
Código
Tabla de contenido
loading

Tabla de contenido