Automatic Transmission Search; Selecting The Measurement Configuration: Analogue/ Digital Signal; External Units Power Supply - Promax TV EXPLORER HD+ Manual De Instrucciones

5.5

Automatic Transmission Search

Holding pressed the
tuning a channel the instrument tries to identify it and save it with the configuration. If the
identification is not possible the channel is removed from list. As a result obtains a new
channel plan that only contains the channels that have been identified.
5.6

Selecting the measurement configuration: Analogue/ Digital signal

Measuring the characteristics of a channel depends, in the first place, on the type
of modulation: analogue or digital.
Use key
[17] key to show the measurements CONFIGURATION menu and select the
Signal option by turning and pressing the rotary selector
allows setting the type of signal to measure. When switching to a new type, the
TV EXPLORER HD+
signal.
5.7

External Units Power Supply

The TV EXPLORER
units (antenna preamplifiers, in the case of terrestrial TV, LNB in the case of satellite TV,
or IF simulators).
In order to select the supply voltage of the external units, press
the screen will display a functions menu labelled EXT. SUPPLY listing the choice of
voltages (which will depend on the band being used). Turn the rotary selector
the desired voltage and press to activate it. The following table shows the choice of
supply voltages:
Page 32
[25] key search starts over the active channel plan. When
[17] to switch between analogue and digital channels. Press the
activates the last measurement configuration used for that type of
HD+ can supply the voltage needed to power the external
USER'S MANUAL. TV EXPLORER HD+
[1]. The Signal option
[11] key, and
[1] to
11/2013