Operating Guide; Prepare The Remote Transmitter - Petsafe BDT-433 Manual De Adiestramiento Y Funcionamiento

Prepare the Remote Transmitter

Step
Charge the Remote Transmitter
1. Lift the rubber cover protecting the Remote
Transmitter Charging Jack.
2. Connect the charger to the Remote Transmitter
Charging Jack.
3. Plug the charger into a standard wall outlet.
4. Charge the Remote Transmitter for 24
take only 12 hours.
5. When charging is completed, replace the rubber cover.
Transmitter Indicator Light - Function and Response
Remote Transmitter Function
Any button pressed
Low battery – Any button pressed
Transmitter Rechargeable Battery Pack
• The rechargeable Nickel Metal Hydride (NiMH) battery pack in the Transmitter is not
memory sensitive and does not require depletion before charging.
• The Transmitter comes partially charged from the factory, but will require a full charge
• When storing the unit for long periods, remember to regularly give the Transmitter a
full charge (12 hours). This should be done once every 4 to 6 weeks.
• Excessive overcharging can shorten battery life. After initial charge, never leave the
Transmitter charging for more than 12 hours.
• If your equipment has not been charged for an extended period, you may experience
previous capacity levels.
• You should expect hundreds of recharge cycles from your battery pack. However, all
rechargeable batteries lose capacity over time relative to the number of recharge cycles
they experience. This is normal. If your operating time drops to half of the original life,
contact the Customer Care Centre to purchase a new battery pack.
• The battery pack should last for a period of 3-5 years. When a battery pack needs replacement,
you can order a new pack by contacting our Customer Care Centre or visit our website at www.
petsafe.net. Please do not open the Remote Transmitter until you have received the replacement.

Operating Guide

rst charge. Subsequent charges
rst use.
rst few uses. Afterwards, the battery life will return to
www.petsafe.net
Charger connector placed
in the Remote Transmitter
Charging Jack
Indicator Light Response
Solid in color
Flashes continuously
ame.
5