Tabla de contenido
Idiomas disponibles
Idiomas disponibles
To answer the video call, press the call key.
video image to be sent to caller?
start sending live video image, select Yes.
If you do not activate the video call, you only hear the
sound of the caller. A grey screen replaces the video
image. To replace the grey screen with a still image
captured by the camera in your device, select
Settings
Phone
>
To end the video call, press the end key.
Video sharing
Use video sharing (network service) to send live video
or a video clip from your mobile device to another
compatible mobile device during a voice call.
The loudspeaker is active when you activate Video
sharing. If you do not want to use the loudspeaker for
the voice call while you share video, you can also use
a compatible headset.
Video sharing requirements
Video sharing requires a UMTS connection. For more
information on the service, UMTS network availability,
and fees associated with using this service, contact
your service provider.
To use video sharing you must do the following:
128
Allow
is displayed. To
Call
Image in video
>
>
Ensure that your device is set up for person-to-
●
person connections.
Ensure you have an active UMTS connection and are
●
within UMTS network coverage. If you move outside
the UMTS network during a video sharing session,
the sharing stops while your voice call continues.
Tools
Ensure that both the sender and recipient are
>
●
call.
registered to the UMTS network. If you invite
someone to a sharing session and the recipient's
device is not within UMTS network coverage, does
not have video sharing installed, or person-to-
person connections set up, the recipient does not
receive invitations. You receive an error message
that indicates that the recipient cannot accept the
invitation.
Settings
To set up video sharing, you need person-to-person
and UMTS connection settings.
Person-to-person connection settings
A person-to-person connection is also known as a
Session Initiation Protocol (SIP) connection. The SIP
profile settings must be configured in your device
before you can use video sharing. Ask your service
provider for the SIP profile settings, and save them in
your device. Your service provider may send you the
settings or give you a list of the needed parameters.
To add a SIP address to a contact card:
Capítulos
Tabla de contenido
Solución de problemas
