The screen display changes to match the settings you
make.
The available settings vary depending on the selected
camera.
The setup settings are shooting-mode specific.
Switching between the modes does not reset the
defined settings.
The setup settings return to the default settings when
you close the camera.
If you select a new scene, the colour and lighting
settings are replaced by the selected scene. You can
change the setup settings after selecting a scene if
needed.
Video settings
To change the main settings, in the video mode, select
Options
Settings
>
Video quality
●
Select Sharing, if you want to send the video clip
using a multimedia message. The clip is recorded
with QCIF resolution, in 3GPP format, and the size is
limited to 300 kB (approximately 30 seconds). You
may not be able to send video clips saved in the
MPEG-4 format in a multimedia message.
Record location
●
to each file, select Yes. Receiving the GPS signal may
take time or the signal may not be available.
86
"Location information", p. 79.
and from the following:
— Set the quality of the video clip.
— To add GPS location coordinates
Video stabilisation
●
camera shaking when recording a video.
Audio recording
●
sound.
Add to album
●
album in Photos.
Show captured video
●
frame of the recorded video clip after the recording
stops. To view the entire video clip, select
the active toolbar (main camera) or
Play
(secondary camera).
Default video name
●
captured video clips.
Memory in use
●
your video clips.
Restore camera settings
●
settings to default values.
See
— Reduce the effects of the
— Select whether to record
— Add the recorded video clip to an
— Select to view the first
Options
— Enter the default name for
— Select where you want to store
— Restore the camera
Play
from
>