Navi Wheel Settings; Sensor Settings; Security Settings; Phone And Sim - Nokia N79 Guia Del Usuario

TV system — Select the analogue video signal
●
system that is compatible with your TV.
Flicker filter — To improve image quality on the
●
screen of your TV, select On. The flicker filter may
not diminish image flicker on all TV screens.

Navi wheel settings

Press , and select Tools
Navi wheel.
Navi wheel
When the Navi wheel setting is set on, you can browse
through files and lists in certain applications by sliding
your finger on the rim of the scroll key. When the Navi
wheel setting is set off, to move up, down, left, or right,
press the scroll key in the desired direction.
Breathing
The rim around the Navi wheel illuminates slowly
when the device is in sleep mode. To switch off the
illumination, press , and select
General Navi wheel
>

Sensor settings

In most applications, the display rotates automatically
between the portrait and landscape modes based on
the orientation of the device.
To change the setting for automatic display rotation,
select Settings General
>
Settings General
> >
Tools Settings
>
> Breathing.
Sensor settings
> >
Turning control and whether you want the display to
rotate automatically.
To ensure that the automatic display rotation works,
hold the device in an upright position.
Automatic rotation does not work if you change the
display rotation setting manually in an application.
When you exit the application, automatic rotation is
activated again.
>

Security settings

Phone and SIM

Press , and select
Security Phone and SIM card
>
following:
PIN code request
●
requested each time the device is switched on.
Deactivating the PIN code request may not be
allowed by some SIM cards.
PIN code, PIN2 code, and
●
>
change the PIN code, PIN2 code, and lock code.
These codes can only include the numbers from 0 to
9.
If you forget the PIN or the PIN2 code, contact your
service provider. If you forget the lock code, contact
a Nokia Care point or your service provider.
"Access codes", p. 21.
Tools Settings General
> >
and from the
— When active, the code is
Lock code — You can
>
See
155