Video Sharing; Requirements; Settings - Nokia N95 8GB Guia Del Usuario

Video sharing

Use video sharing (network service) to send live video
or a video clip from your mobile device to another
compatible mobile device during a voice call.
The loudspeaker is active when you activate Video
sharing. If you do not want to use the loudspeaker for
the voice call while you share video, you can also use
a compatible headset.

Requirements

Video sharing requires a UMTS connection. Your ability
to use video sharing depends on the availability of the
UMTS network. Contact your service provider for more
information on the service and network availability
and fees associated with using this service.
To use video sharing you must do the following:
Ensure that your device is set up for person-to-
●
person connections.
Ensure you have an active UMTS connection and are
●
within UMTS network coverage. If you start the
sharing session while you are within UMTS network
coverage and a hand over to GSM occurs, the sharing
session is discontinued, but your voice call
continues. You cannot start video sharing if you are
not within UMTS network coverage.
Ensure that both the sender and recipient are
●
registered to the UMTS network. If you invite
someone to a sharing session and the recipient's
device is not within UMTS network coverage, does
not have video sharing installed, or person-to-
person connections set up, the recipient does not
know that you are sending an invitation. You receive
an error message that indicates that the recipient
cannot accept the invitation.

Settings

To set up video sharing, you need person-to-person
and UMTS connection settings.
Person-to-person connection settings
A person-to-person connection is also known as a
Session Initiation Protocol (SIP) connection. The SIP
profile settings must be configured in your device
before you can use video sharing. Ask your service
provider for the SIP profile settings, and save them in
your device. Your service provider may send you the
settings over the air or give you a list of the needed
parameters.
To add a SIP address to a contact card, do the following:
1. Press , and select Contacts.
2. Open the contact card (or start a new card for that
person).
3. Select Options Add detail
>
or Share view.
115