Time-Out Timer; Power Select; Call Tones; Scramble - Motorola RVA50UL Manual Del Usuario

separately. Please contact your Motorola
point of purchase for more information.

Time-Out Timer

This timer sets the amount of time that the
radio can continuously transmit before the
transmission is automatically terminated. The
default setting is 60 seconds and can be
changed using the CPS.

Power Select

Power Select allows you to select between
high and low transmission power per frequency
in each channel. The power levels for RVA
Series 2W toggle between 1W and 2W.

Call Tones

Call Tones feature allows you to transmit an
audible tone to other radios on the same
channel to alert them that you are about to talk
or to alert them without speaking.
To use this feature, the Call Tones must be
programmed to either SB1 or SB2 and 1 of the
3 pre-recorded tones is selected.

Scramble

The Scramble feature makes transmissions
sound garbled to anyone listening without the
same code. Scramble default value is OFF. To
change the scramble code during radio's
normal operation, the Scramble feature must
be programmed to either SB1 or SB2.

Reverse Burst

Reverse Burst eliminates unwanted noise
(squelch tail) during loss of carrier detection.
You can select values of either 180 or 240 to be
compatible with other radios. The default value
is 180.
Notes:
• The features described in previous pages are just
some of the features CPS has. CPS offers more
capabilities. For more information refer to the
HELP file in the CPS.
• Some of the features available with the CPS
software may vary depending on the radio model.
41
English