Stainless Series Custom Side Panels - Kitchen Aid KBSN602ESS Guia De Instalacion

Backer Panels
NOTES:
■ Dashed lines represent placement of backer panels on
overlay panels.
■
Illustration shows backer panels placed on decorative
overlays.
³⁄₁₆
6 "
(15.7 cm)
Top Offset
⁵⁄₈
1 " (4.13 cm)
Side Offset
¹⁄₂
70 "
(179.1 cm)
A
Bottom Offset
¹⁄₈
Model D E
36 14¹/₄" (36.20 cm) 19¹/₄" (48.90 cm) 33³/₄" (85.73 cm)
42 16³/₄" (42.55 cm) 22³/₄" (57.79 cm) 39³/₄" (100.97 cm)
48 19¹/₄" (48.90 cm) 26¹/₄" (66.68 cm) 45³/₄" (116.21 cm)
C
Side Offset
¹⁄₂
" (12.7 mm)
Bottom Offset
¹⁄₂
" (1.27 cm)
Handle-
¹⁄₄
"
(6.4 mm)
¹⁄₂
70 "
(179.1 cm)
B
" (3.2 mm)
F
Overlay Series Door Handle Kits
The following handle style is available. Contact your KitchenAid
dealer or KitchenAid Parts and Accessories at
1-800-442-9991. In Canada, call 1-800-807-6777.
Knurl grip handle with chrome endcaps - W10782873

Stainless Series Custom Side Panels

Custom side panels may be needed when not enough space is
available to have cabinets on both sides of the refrigerator or
when the refrigerator is placed at the end of a cabinet run. You
may choose an Inset, Flush, or Recessed Inset panel installation.
Refrigerator and Side Trim Dimensions
The width and height of a side panel are determined by the type
of installation you are planning.
NOTES:
■
The dimensions shown are actual product dimensions
and may not reflect the needed panel installation
dimensions.
■ The side panel should be a minimum of ½" (1.27 cm) thick
to avoid warping.
■ If the opening depth is 25" (63.5 cm) or more, you may
want to install a support board on rear wall.
Refrigerator
13 13 13 13 13 13