Description, Specifications And Standard Equipment Description; Specifications; Standard Equipment; Accessories - RIDGID K-3800 Manual Del Operador

K-3800 Drain Cleaning Machine
Description, Specifications
And Standard Equipment
Description
The RIDGID K-3800 Drain Cleaning Machine will clean
drain lines up to 4" in diameter and 100 feet in length.
Drum provided with the machine holds up to 100 feet of
" cable or 90 feet of " cable. An optional sink drum
3 / 1 /
8 2
" cable. Both drums include an inner-
holds 50 feet of 5 /
16
drum to guard against cable flip-over. Designed to clean
sink lines, floor drains and roof vents.
The drum is driven by a 1 /
10
has a grounded electrical system. An integral Ground
Fault Interrupter (GFCI) is built into the line cord and a
pneumatic foot actuator provides ON/OFF control of the
motor. When the cable hits a blockage, the motor gears
down automatically to provide more power and greater op-
erator control.
The cable is manually fed in and out of the drain. An
optional autofeed is available that will advance or retract
the cable. Drum tilt-adjusts to provide proper cable feed
angle. The cable has a quick change coupling system for
connecting tools. The drum separates from the motor
frame for two-hand transport.

Specifications

Line Capacity ...............Depends on choice of cable.
Refer to the following chart
for recommendations.
Recommended Line Size and Distance
Line Size
Cable Size in.
" Cable
1 / 3 / - 1 1 /
4 4 4
" Cable
5 / 3 / - 1 1 /
16 4 2
" Cable
3 / 1 1 / - 3
8 2
" Cable
1 / 2 - 4
2
Drum Capacity
Standard Cable Drum....100' of
90' of
Sink Drum......................50' of
Motor
Type ..............................115V/50-60 Hz, Reversible,
Universal AC Motor. 220-240V
Available Upon Request
Rating ............................ 1
Amps .............................2
Weight (machine only) ...35 lbs. (15.9 kgs)
Length ...........................19" (48 cm)
4
HP universal series motor that
Distance
mm ft. M
19 - 32 35 10.6
19 - 38 50 15.2
38 - 75 100 30.0
50 - 100 90 27.0
" Cable
3 /
8
" Cable
1 /
2
" Cable
5 /
16
/ HP
10
Height ............................17" (43 cm)
Width .............................14" (36 cm)

Standard Equipment

K-3800 w/C-31 Cable, Cat. No. 53112 includes:
• K-3800 Machine
" x 50'' Inner Core Cable
• C-31, 3 /
8
• T-202 Bulb Auger
• T-205 "C" Cutter 1
• T-211 Spade Cutter
• A-13 Pin Key
• Pair Gloves
K-3800 w/C-32, Cat. No. 53117 includes:
• K-3800 Machine
" x 75' Inner-Core Cable
• C-32, 3 /
8
• T-202 Bulb Auger
• T-205 "C" Cutter
• T-211 Spade Cutter
• A-13 Pin Key
• Pair Gloves
K-3800 w/C-45, Cat. No. 53122 includes:
• K-3800 Machine
" x 75' Inner-Core Cable
• C-45, 1 /
2
• T-102 Funnel Auger
• T-142 Blade Cutter
• T-107 Spade Cutter
• A-12 Pin Key
• Pair Gloves
K-3800 w/C-46, Cat. No. 53127 includes:
• K-3800 Machine
" x 90' Inner-Core Cable
• C-46, 1 /
2
• T-102 Funnel Auger
• T-142 Blade Cutter
• T-107 Spade Cutter
• A-12 Pin Key
• Pair Gloves

Accessories

Catalog Model
No. 55002 A-380
55007 A-381
41937
59230
59225
55017
55012 A-381-A
60087
Ridge Tool Company
"
3 /
8
No. Description
",
Std Drum for 3 / 1
8
",
Sink Drum for 5 /
16
— Pair of Gloves
" Cable
A-13 Pin Key for 3 /
8
" Cable
A-12 Pin Key for /
1
2
— Transport Cart
Sink Drum w/25' x
Core Cable
— K3800 Power Feed
" Cable
/
2
" Cable
1 /
4
" Inner
5 /
16