5
OVERVIEW
The Trak-It tool is a self-contained, fully portable tool that uses liquid hydrocarbon fuel to
power a unique linear drive internal combustion motor.
In order for you to fully understand the information contained in this manual, you need a
basic understanding of the tool. The Trak-It tool is made up of three assemblies: the
Handle, the Motor, and the Magazine.
As you examine the Trak-It tool, become familiar with the three major assemblies and the
various components located in each of them.
The Handle Assembly contains the Fuel Cell, the Battery, Low Battery Voltage
Indicator Light, and the Trigger.
The Motor Assembly contains the Cover and Filter, the Motor Housing, the Nose
Piece, and the Contact Arm.
The Magazine Assembly contains the Follower, the Follower Release Lever, and
the Magazine Foot.
Dimension:
Weight
Height
Length
Width
Activation Mode:
Full sequential actuation
Cycle Rate:
Intermittent Operation 2 to 3 pins per second
Continuous Operation 1000 pins per hour
Noise Level:
A-weighted single-event — LWA, 1 s, d 105.30 dB
sound power level
A-weighted single-event — LpA, 1 s, d 96.92 dB
emission sound pressure
level at work station
These values are determined and documented in accordance to EN12549 : 1999.
Vibration:
Vibration characteristic value = 3.70 m/s
These values are determined and documented in accordance to ISO 8662-11.
This value is a tool-related characteristic value and dose not represent the influence to the
hand-arm-system when using the tool. An influence to the hand-arm-system when using
the tool will for example depend on the gripping force, the contact pressure force, the
TRAK-IT C3
8.2 pounds (3.7 kg)
※
15.3 inches (38.9 cm) 15.3 inches (38.9 cm)
17.3 inches (44.0 cm) 13.3 inches (33.9 cm)
4.2 inches (10.6 cm)
Includes tool and battery
※
2
5
TRAK-IT TOOL MODEL C3, C3 ST
TRAK-IT C3 ST
TRAK-IT C3 XL
7.9 pounds (3.6 kg)
0.0 pounds (0.0 kg)
0.0 inches (00.0 cm)
0.0 inches (00.0 cm)
4.2 inches (10.6 cm)
0.0 inches (00.0 cm)