Use And Maintenance - Palazzetti INSERIMENTO SMALL 54T Manual De Instalación, Uso Y Mantenimiento

Ocultar thumbs Ver también para INSERIMENTO SMALL 54T:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

7.2.2 Cleaning the heat exchange compartment
Twice every season the heat exchange compartment
must be cleaned completely by removing the cast-
iron back plate when cold. To remove the back
plate, after having taken out the cast-iron burn pot,
proceed as follows:
A) remove the protective grid from inside the box,
unscrewing the four cross-slotted screws with
a screwdriver
;
B) remove the inspection plate stop
C) remove the inspection plate unscrewing the black
knurled knob
. (Fig.7.7.1);
D) remove all pellet residuals from inside the feed pipe
with a screwdriver
The presence of condensate indicates in ltration
of water, excessive ue gas cooling or the use of
poor quality pellets. The possible cause must be
identi ed so as to restore correct operation of the
appliance
After cleaning, carefully reposition all the parts that
had been removed.
7.2.3
This should be performed at least twice a year, at
the start of and half-way through winter, and in any
case whenever necessary (Fig. 7.8).
If there are horizontal sections, check for and
remove any accumulated ash and soot before these
block the ow of ue gas.
If not cleaned correctly, the stove may not operate
properly, with problems including:
A) poor combustion;
B) blackening of the glass;
C) blockage of the burn pot by ash and pellets;
D) accumulated ash and excessive fouling of the heat
exchanger, with a consequent decline in ef ciency.

USE AND MAINTENANCE

(Fig. 7.7);
(Fig.7.7.2).
00 4776980 - 06/2018 - PN - Italy
Fig. 7.7
Fig. 7.7.1
Fig. 7.7.2
Fig.7.8
37
Tabla de contenido
loading

Tabla de contenido