Tabla de contenido
Idiomas disponibles
Idiomas disponibles
7.1.4 Cleaning the glass
Clean the glass with a damp cloth or paper with ash on
it ( g. 7.6).
Rub until clean.
Do not clean the glass while the stove is running and do
not use abrasive pads.
7.2 SPECIAL MAINTENANCE
The stove may only be maintained by an authorised
technical service centre.
Prior to effecting any maintenance operation, adopt
the following precautions:
1. Make sure that the stove is completely cold.
2. Make sure that the ashes have gone out completely.
3. Use the personal protective equipment speci ed in
Directive 89/391/EEC.
4. Make sure the mains power is off at the master
power switch.
5. Ensure
that
restored accidentally. Remove the power plug from
the socket.
6. Always use proper tools.
7. Once maintenance or repair activities are completed,
reinstall all the protections and reactivate all the
safety devices prior to restarting the system.
7.2.1 Cleaning the smoke tee
Every 500 kg of burnt pellets, it is necessary to clean
the smoke evacuation tee by extracting the stove
from its seat and sucking up the residues contained
inside the Tee with an ash-cleaner.
Insert the Allen wrench (1) into the unlocked unlocking
seat; turn the locking lever counterclockwise to
position (2) (Fig. 7.6)
Pull the machine outward until the guides have
run out.
Clean the TEE pipe with ashtray. (Fig. 7.7).
36
the
power
supply
cannot
00 4776980 - 06/2018 - PN - Italy
INSTALLATION
be
Fig.7.6
1
Fig.7.6
Fig.7.7
2
Tabla de contenido
