Caster Installation - Blodgett DFG-50 Manual De Instrucciones

ATTACHMENT TO STAND
1. Set the oven on the stand. Center it to the
frame.
2. Remove the oven's right side panel.
3. Align the holes in the oven bottom with the
holes in the stand.
4. Attach with bolts, washers and nuts as shown.
5. Replace the side panel
Figure 3
Installation

CASTER INSTALLATION

NOTE: Install casters with locking devices on the
front. Install non-locking casters on the
rear.
Casters for Single and Double Stacked Ovens
1. Attach the legs.
2. Loosen the lock nut on each adjustable leg
foot. Remove the foot assemblies.
3. Insert one caster into each leg as shown.
Tighten the lock nuts to secure the casters.
Adjustable
Leg Foot
Low Profile Casters for Double Stacked Ovens
1. Align the three holes in each caster assembly
plate with those in the oven bottom. Attach
with three 1/2" bolts.
5
Oven Assembly
Caster Assembly
64 cm Legs Shown
Figure 4
Figure 5