Blodgett DFG-50 Manual De Instrucciones página 21

Operation
KCO-25E Solid Stage Digital
1
OPERATION
NOTE: Operation is restricted to qualified person-
nel.
1. Toggle the POWER SWITCH (1) to the ON
position.
2. Select one of the programmed PRODUCT
KEYS (4).
NOTE: Press once for one pan, twice for two
pans, etc.
The product keys have been programmed at
the factory as follows:
Recipe Temp.
1 149_C
2 163_C
3 177_C
3. When the DISPLAY (2) flashes PROD and 1
the unit is at the programmed temperature.
NOTE: If the oven will not start after several at-
tempts contact a qualified installer.
Shut Down
1. Toggle the POWER SWITCH (1) to the OFF
position.
4
Figure 18
Recipe Temp
4 191_C
5 205_C
6 219_C
18
2 3
PROGRAMMING
1. Press the PROGRAM (3) key.
2. When the display reads CODE, use the prod-
uct keys to enter 1 1 1 1. Press the PROGRAM
(3) key.
3. Press the desired product key. The display
reads TE # and the current cook temperature.
Use the product keys to enter the new cook
temperature. Press the PROGRAM (3) key.
4. The display reads TI # and the current cook
time for one pan. Use the product keys to en-
ter the new cook time. Press the PROGRAM
(3) key.
5. Repeat step 4 for up to three pans. The display
reads PROG.
6. Press the PROGRAM (3) key to exit program-
ming.