Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Method2
The dryer must be connected to the cold
water faucet using the new inlet hoses. Do
not use old hoses.
1.
If the "Y" connector (A) cannot be
attached directly
to the cold water
faucet, the short hose must be used.
2.
Turn the cold water faucet off.
3.
Attach the short inlet hose (B) to the cold
water faucet.
Screw on the coupling by hand until it is
seated on the faucet.
4.
Using pliers, tighten the coupling with
an additional
two-thirds
turn.
NOTE
Do not overtighten,
as it may damage the
coupling.
English
27
Capítulos
Tabla de contenido
