Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Location considerations
Locate the dryer where there is enough space at the front for loading the dryer, and enough
space behind for the exhaust system. This dryer is factory-ready
for rear exhaust. To exhaust
out the bottom or the right or the left (electric model only), use the accessory exhaust kit
(sold separately).
Instructions
are included with the kit. It's important
to make sure the room
has enough fresh air. The dryer must be located where there is no air-flow
obstruction.
On gas dryers, adequate clearance as noted on the data plate must be maintained
to ensure
adequate air for combustion
and proper dryer operation.
Do not install or store the dryer in an area where it will be exposed to water and/or weather.
Keep the dryer area clear of combustible
materials, gasoline, and other fammable
vapors and
liquids. A dryer produces combustible
lint. The area around the dryer should be kept lint free.
Alcove or closet installation
Minimum
clearances between the dryer and adjacent walls or other surfaces are:
2" in front, 17" on top, !" on either side, and 5" in the back.
The closet front must have two unobstructed
air openings for a combined minimum
total area
of 72 in 2 with 3" minimum
clearance on the top and bottom. A Iouvered door with equivalent
space clearance is acceptable.
z_
WARNING
•
You must exhaust the dryer to the outside to reduce the risk of fire when you install the
dryer in and alcove or closet.
•
To reduce the risk of fire, you must exhaust the dryer to the outdoors.
See "Exhausting"
section.
•
No other fuel-burning
appliance should be installed in the same closet as the dryer.
English
13
Capítulos
Tabla de contenido
