Advice On Working With Materials / Tools / Speed Ranges; Tips And Tricks; Maintenance And Cleaning - Parkside PMGS 12 A1 Instrucciones De Utilización Y De Seguridad

©
Advice on working with
materials / Tools / Speed ranges
Use the highest speed when working on steel
or iron with the milling bits
Use a short trial on a test piece to determine the
optimum rotational speed range for working on
zinc, zinc alloy, aluminium, copper and lead.
Use the low speed range for working on plastics
and low-melting point materials.
Use high speeds on wood.
Use the medium speed range for cleaning,
polishing and buffing.
The following information shall be considered as
recommendatory only. Learn by practical experience
which tools and settings are the best for the materi-
als you work with.
Setting the appropriate speed:
Symbols on Material to be
ON / OFF
worked on
switch 1
(Drill / grinder switched off)
OFF
Plastics and low melting
5
point materials
Stone, Ceramics
7
Softwood, metal
10
Hardwood
17
Steel
20
Examples of appropriate tool selection
Function:
Function Accessory
Drilling HSS drill
Milling Milling bits
20
Engraving Engraving
bits
21
.
20
Application
Drilling wood
11
Various tasks, e.g.
hollowing out,
gouging, shaping,
grooving or slotting
Making marks,
craft projects
(see Fig. D)
Operation / Maintenance and cleaning
Function Accessory
Polishing, Metal brush
15
derusting
Polishing
wheel
13
CAUTION!
Use only the
lightest con-
tact pressure
of the tool on
the work-
piece.
Cleaning Plastic brush
19
Metal brush
15
Grinding Grinding
wheels
14
grinding bits
22
Cutting and Cutting discs
sawing
17
Saw blade
16
©

Tips and tricks

If you use press too hard you run the risk of break-
ing the tool or damaging the workpiece. You will
achieve the best results by operating the tool at a
constant rotational speed and using a low contact
pressure on the workpiece.
©

Maintenance and cleaning

The device is maintenance-free.
Clean all the dirt off the drill / grinder. Use a
dry cloth for cleaning.
Application
Derusting
Working on vari-
ous metals and
plastics, in particu-
lar noble metals
like gold or silver
(see Fig. E)
E.g. cleaning com-
plex plastic hous-
ings or the area
around a door lock
E.g. cleaning cut-
lery, jewellery,
tools (The metal
brush is softer than
steel)
Grinding work on
, stone, wood; fine
work on hard mate-
rials such as ceramic
or alloyed steel
(see Figs. F, G)
Cutting metal,
plastic or wood
Saw blade, Saw-
ing steel, metal,
wood or plastic
(see Fig. H)
GB/MT 31