Sicam FALCO EVO 622 Manual Original página 38

en 38 | FALCO EVO 622/622 IT | Commissioning
4. Commissioning
4.1 Unpacking
1. Remove the strap and securing clamps from the
pallet as well as the cardboard packaging.
i
After unpacking, check that the FALCO EVO 622/622 IT
is in perfect condition and that none of the compo-
nents exhibit any signs of damage. In case of doubt,
do not perform commissioning and call in a qualified
engineer and/or the seller of the machine.
2. Take the standard accessories and the packaging ma-
terial out of the transportation crate.
i
Dispose of the packaging material in the proper man-
ner at an appropriate collection site.
4.2 Installation
4.2.1 Erecting the FALCO EVO 622/622 IT
The following equipment is recommended for the fol-
lowing operations:
R
Lifting strap, model DR50 (safety factor 6:1) with a
length of X m
R
Lifting strap, model DR50 (safety factor 6:1) with a
length of X m
R
Suitable block and tackle for lifting the
FALCO EVO 622/622 IT.
1. Remove the plastic cover at the base of the column.
|
1 695 101 508 2014-03-21
Fig. 6: Removing plastic cover at base of column
2. Slacken off the bolts with which the
FALCO EVO 622/622 IT is attached to the pallet.
Fig. 7: Erecting the FALCO EVO 622/622 IT
3. Attach the straps as shown in the illustration.
!
The lifting straps could damage the supply hoses
of the cylinder or add-on components of the
FALCO EVO 622/622 IT. Take care when attaching the
straps.
Sicam srl società unipersonale