Replacing Tail/Brake/Turn/Backup Lamp Bulbs; Replacing Fog Lamp Bulbs - Ford Explorer 2008 Manual De Instrucciones

Lights

Replacing tail/brake/turn/backup lamp bulbs

1. Turn the headlamp switch to OFF
and open the liftgate.
2. Remove the two bolts from the
lamp assembly.
3. Remove the lamp assembly.
4. Rotate the bulb socket
counterclockwise and remove it
from the lamp assembly.
5. Pull the bulb straight out of the
socket.
Reverse steps to reinstall bulb(s).

Replacing fog lamp bulbs

1. Make sure the headlamp switch is
in the OFF position.
2. Remove the bulb socket from the
fog lamp by turning it
counterclockwise.
3. Disconnect the electrical
connector.
Reverse steps to reinstall bulb(s).
97
2008 Explorer (exp)
Owners Guide (post-2002-fmt)
USA (fus)