Front Cutting; Vacuum Cleaner Connetion; Getting Started - Carat EASYCOUPNEXT 350 Manual Del Usuario

9.3 FRONT CUTTING.

First, block the cutting head by tightening up the
crank. Then, push the cart with the piece to cut on
top until it gets close to the running blade. Keep
pushing accordingly to the material hardness and
the cutting depth.

9.4 VACUUM CLEANER CONNETION.

The machine is equipped with a nozzle to connect it to a vacuum cleaning system, in order to collect and get rid of the
dust and other waste caused by the cutting.
ONLY DUST VACUUM CLEANER: Do not cut with water if your vacuum cleaner is just for dust.
DUST AND LIQUID VACUUM CLEANER: You can use it for both, dry and wet cutting.

9.5 GETTING STARTED.

1. Place the machine on a flat well illuminated location. Use the adjustable legs to ensure the estability
while using the machine.
2. Mount the handle and secure it with the bolt.
3. Mount the blade as previously described.
4. Release the rolling cart from the brake.
5. Set the right cutting depth with the rotation lock handle.
6. Plug the machine in the power supply socket and check that the blade runs in the right direction.
7. Connect the flexible hose of the vacuum cleaner to the waste socket of the machine and to the power
supply.
8. Connect the machine to the water supply if a wet cutting is needed.
9. Start cutting.
11
ENGLISH