General Information; General Description Of The Machine - Carat EASYCOUPNEXT 350 Manual Del Usuario

1. GENERAL INFORMATION

WARNING: Pease read and understand perfectly the present instruction
before using the machine.
This user's manual, together with the quick reference guide attached, provides you with the necessary instructions to
start, maintaining and, if necessary, repairing the machine.
All aspects related to the user's safety and health while carrying out any of the aforementioned process have been
stated. Respecting all instructions and recommendations assures safety and low maintenance. Reading carefully this
manual is mandatory to any person responsible for the use, maintenance or repair of this machine.
It is recommended to have always this manual in an easily accessible place close to
where the machine is being used.

2. GENERAL DESCRIPTION OF THE MACHINE.

CARAT cutting table saws are designed and manufactured to be used at building sites for cutting masonry materials,
stone and any mineral and compound building materials with at least one bearing side (tile, terrazzo, brick, marble,
granite, concrete or ceramics shingle, stoneware...) The cutting tool is a diamond blade powered by an electric motor.
The blade can be used to dry cut or to water cooled cutting. The progress of the blade is handled manually by moving
the rolling cart holding the material to cut towards the rotating blade. The EasyCoupNext model is manufactured
using high quality materials.
Any use other than the machine has been designed for is considered
inappropriate and can be dangerous; therefore, it is expressly prohibited.
 The cutting blade can be lifted or lowered for different cutting depth.
 The cutting lenght can be adjusted by approaching the cutting blade to the material to cut.
 The rolling cart moves on wheels rolling on a 'U' shaped rail, to ensure perfect scrolling.
 Four adjustable legs allow leveling the machine.
 The Rolling cart features a graduated ruler for angle cutting.
 The blade is protected with a guard including grooves for water cooling.
 The electrical components of this machine comply with EU norms.
 For transportation safety, the rolling cart is supplied with a bolt to lock it during transportation.
 The rolling cart is designed with an anti-overturn system to avoid the cart from falling or turning when the
materials to cut exceed the cart dimensions and are not supported elsewhere.
 The machine features a dust collecting system assisted by vacuum cleaner.
 This machine model is built according to EU directives.
 All motor bearings are mounted with a degree of sealing to ensure long life to its elements
4
ENGLISH