Mount Handgrip; Assemble/Set Protective Hood; Installing/Changing Disc; Operation - Parkside PWS 125 B2 Manual De Instrucciones

GB
MT

Mount handgrip

The device must only be
operated with the handgrip
mounted.
Screw the handgrip (1), depending on the
type of work, to the left, right or above the
device using the threading for the hand-
grip (2/8).
Assemble/set protective
hood
The device must only be
operated with the protective
hood mounted.
1. Open the tightening lever
C
( 19)
2. Place the protective hood
( 14) on the positioning holes.
3. Turn the protective hood
( 14) into the working positi-
on. The closed side of the protec-
tive hood must always face the
operator.
4. Close the tightening lever
C
( 19) again. The protective
hood should not be able to be
turned any more.
If needed, the tension on the adjustment
C
nut ( 18) can be set. Use the chuck key
( 13) for this.

Installing/changing disc

1. Press the spindle stop button
( 9).
2. Turn the mounting spindle (
until the spindle lock fixed the
mounting spindle. Keep and con-
tinue to hold down the spindle
74
3. Release the clamping nut
4. Set the desired disc onto the
5. Set the clamping nut (
6. Press the spindle stop button

Operation

Caution! Risk of injury!
- Always remove the mains plug
- Only use grinding discs and
- Only use grinding tools which
- Only use grinding discs where
B
- Do not use any broken, cracked,
17)
lock button ( 9)
B
( 16) with the chuck key
( 13). You can release the
spindle lock button (
B
mounting flange (
the disc should always face the
device.
the mounting spindel (
again. The flat side of the clam-
ping nut must face the attach-
ment tool.
( 9) and pull the clamping
B
nut ( 16) tight again using the
chuck key ( 13).
before working on the tool.
accessories recommended by the
manufacturer. Using other attach-
ment tools and other accessories
can represent a risk of injury for
you.
bear information about the
manufacturer, type of binding,
dimension and permitted number
of revolutions.
the printed rotational speed is at
least as high as what has been
specified on the name plate of
the device.
or otherwise damaged grinding
discs.
9).
15). label on
B 16) on
B
17)