Tabla de contenido
10
12
15
502020.75.25_021V4D0102_1012_IM_bernette 10 12 15_EN_ES_FR_PT
Connecting machine to
EN
power source
Connect the machine to a power source as
illustrated.
Attention:
Unplug power cord when machine is not in use.
Sewing light
Press main switch for power and light on. (1)
Position 0 - Machine is switched off.
Position I - Machine and sewing light is
switched on.
Foot control
Foot control regulates the sewing speed. (2)
Attention:
Consult a qualified electrician if in doubt as
to connect machine to power source. Unplug
power cord when machine is not in use. The
appliance must be used with the foot controller
KD-1902 (100-120V area) / KD-2902 (220-240V
area) manufactured by ZHEJIANG FOUNDER
MOTOR CORPORATION Ltd. (China).
IMPORTANT NOTICE
If the appliance has a polarized plug (one blade
is wider than the other). To reduce the risk of
electric shock, this plug will fit in a polarized
outlet only one way. If the plug does not fit fully
in the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician. Do not modify
the plug in any way.
The optimal operation temperature for the
failure-free operation of this machine must be
68°F +/- 50°F.
Tabla de contenido
