Wireless 802.11 Advanced Page; 802.11 Inalámbrica Avanzada Página - Motorola SURFboard Guia Del Usuario

Wireless 802.11 Advanced Page

Configure data rates and Wi-Fi thresholds.
FIELD
54g™ Mode
Basic Rate Set
54g™ Protection
XPress™ Technology
Afterburner™ Technology
Rate
Beacon Interval
SVG1202 Wireless Voice Gateway • User Guide
Field Descriptions for the Wireless 802.11 Advanced Page
DESCRIPTION
Sets these network modes:
54g Auto, 54g Performance, 54g LRS, and 802.11b only 54g Auto, 54g Performance, 54g LRS, and 802.11b only 54g Auto, 54g Performance, 54g LRS, and 802.11b only 54g Auto, 54g Performance, 54g LRS, and 802.11b only 54g Auto, 54g Performance, 54g LRS, and 802.11b only
54g Auto accepts 54g, 802.11g, and 802.11b clients but optimizes performance based on
the type of connected clients. 54g Performance accepts only 54g clients and provides the
highest performance throughout; nearby 802.11b networks may have degraded
performance. 54g LRS interoperates with the widest variety of 54g, 802.11g, and
802.11b clients. 802.11b accepts only 802.11b clients.
Determines which rates are advertised as basic rates. Default uses the driver defaults. All sets Determines which rates are advertised as basic rates. Default uses the driver defaults. All sets Determines which rates are advertised as basic rates. Default uses the driver defaults. All sets
all available rates as basic rates.
Improves performance in Auto mode using RTS/CTS protection in mixed
802.11g + 802.11b networks. Turn protection off to maximize 802.11g throughput under
most conditions.
Enhances Wi-Fi throughput and efficiency used when there are mixed wireless networks
in the surrounding area from 802.11a/b/g networks.
Enhances Wi-Fi 802.11g standard by increasing throughput by 40 percent.
Forces the transmission rate for the AP to a particular speed. "Auto" provides best
performance in nearly all situations.
Sets the beacon interval for the AP. The default is 100, which is fine for nearly all Sets the beacon interval for the AP. The default is 100, which is fine for nearly all Sets the beacon interval for the AP. The default is 100, which is fine for nearly all
applications.
B
38