Engine Starting; Important - Husqvarna SMR 511 2012 Manual De Uso

ENGINE STARTING

With cold engine, i.e., after the motorcycle has not
been used for a while or in low ambient temperatures,
operate in the following manner:
1) Turn key (1) in the ignition switch to ON (the hum
you may hear when key is turned to ON is caused by
the fuel pump pressurising the delivery system);
2) pull clutch lever (2);
3) shift gear pedal (3) to neutral position;
4) Press starter button (4).
When a cold engine has just been started, do not
increase revs, to ensure an adequate oil warm-up
and circulation.

IMPORTANT

NEVER START ENGINE WITH BATTERY DIS-
CONNECTED FROM CIRCUIT.
1
2
IMPORTANT NOTE IN CASE OF COLD START AT LOW TEM-
PERATURES
It is recommended to briefly warm up the engine at
idle.
This allows oil reaching all points that need lubricating and
coolant to warm up to regular operating temperature.
Avoid warming up the engine for too long.
SPECIFICATIONS - OPERATION - MAINTENANCE
N
3
4
EN - 19