Operating Instructions - Waring Commercial WSV16 Manual De Instrucciones

OPERATING
INSTRUCTIONS
Control Panel:
1. Power Button (
the unit on or off.
2. Memory Button: Select memory to program memory stations
M1–M5.
3. LED Memory Stations M1–M5
4. Save Button: Saves user programmed settings.
5. Water Temperature Indicator (Cº or Fº)
6. Start Button (
7. TEMP Button: The temperature set range is between
35°C/95°F and 90°C/194°F. Default temperature is: 60°C/140°F.
8–9. (+/-) Buttons: Increases/decreases time or temp. For fast
scroll, press and hold (+/-) buttons.
10. TIMER (SET/START/OFF) Button: Set time from 00:00–
99:00. Default time is 02:00. Hold timer button for 4 seconds
to turn timer off, machine will remain on until manually shut off.
Press timer again to default back to 02:00 minutes or to reset
time, use +/- arrows.
11. Time Indicator
TO SET THE MACHINE FOR USE
1. Be sure the vessel contains water before starting the unit. The
water must be over the minimum level (MIN) which is marked on
the side wall of the vessel. The unit will not start if water level is
below the MIN line and will show error code E001.
2. Plug the cord set into an electrical outlet.
3. Hold the Power button (
NOTE: Buttons are capacitive touch and only
require a light tap with your finger to operate.
5
4
10
11
): Touch and hold for 2 seconds to switch
): Starts water circulator.
) for 2 seconds to turn the machine
8
3
2
9 8
7
1
6