Ferroli TERMO NOVARA Manual De Instalación, Uso Y Mantenimiento página 57

By accessing the submenu: WEEK-END PROGRAM it is
possible to enable/disable and set the week-end (Saturday -
Sunday) chronothermostat functions.
Activate WEEK-END
deactivating the weekly programming.
In order to avoid unwanted start and shutdown
operations, activate only one programme at a time.
Deactivate the
programme is required; with this setting it is advisable to
deactivate the week-end programme.
4.6.4 Menu 04 – Select language
With this selection it is possible to select the dialogue language
from those available entered in the menu, and namely:
- ITALIAN
- FRENCH
- ENGLISH
- GERMAN
- SPANISH
4.6.5 Menu 05 – Standby mode
By selecting ON in STANDBY mode the corresponding symbol on the display lights up and the stove shuts down
automatically when the room temperature T has reached the set value (Tset + ΔT) for a given time.
The next restart in automatic will be possible only when the room temperature falls below the set value by a few
degrees and precisely (Tset - ΔT) where ΔT default = 2°C.
With the OFF selection, the modulation function is active but not the STANDBY mode. Therefore when the
temperature exceeds the set value the stove will operate at minimum power.
If the installation involves the use of a hot water tank, the standby mode is restricted to ON, and cannot be disabled.
4.6.6 Menu 06 – Buzzer
With this selection it is possible to activate/deactivate stove acoustic signalling.
4.6.7 Menu 07 – Initial loading
The setting of LOAD INITIAL allows pellet preloading for a time equal to 90 sec. with the stove off or cold. It is
started with the button P1 and stopped with the button P4.
Button 'P1'
.
4.6.8 Menu 08 – Stove status
With this selection it is possible to display the instantaneous stove status giving the operating status of the various
devices connected to it; various pages placed in succession are available for monitoring.
4.6.9 Menu 09 – Settings by technician
This selection is reserved for the authorised technician of the constructor service centre.
Modification of the technical parameters of menu 09 must be done by authorised and competent
personnel; any changes made at random can cause serious damage for which the constructor declines
any liability.
programming
daily programme if
only after
the weekly
Menu level
57
Menu level
Input
Menu level
Dialogue box
Button 'P4'
TERMO-NOVARA