Initial Configuration - Palazzetti ECOFIRE IDRO Manual De Instalación, Uso Y Mantenimiento

6.3 INITIAL CONFIGURATION

Before proceeding, power up the stove using the safety switch on the rear.
Use the arrow buttons to scroll between the icons until reaching the setup menu
a) Use the
b) Select submenu "8"; " --0
c) Press and enter the value "54" using the
d) Press
buttons.
g) Press
and switch it back on..
FOUR DIFFERENT CONFIGURATIONS ARE AVAILABLE:
CONFIGURATION 1
modulates output (to minimise fuel consumption) when reaching the set water temperature.
La stufa si spegnerà anche nell'eventualità in cui la temperatura dell'acqua continui a crescere nonostante la
modulazione. In questo caso la stufa si riaccenderà solo se la differenza di temperatura tra il valore impostato
e quello reale è maggiore di 20°C.
CONFIGURATION 2
the central heating radiators.
illustrated in the diagram shown in Fig. 6.3.
The stove will modulate output according to the room temperature read by the probe on the stove.
The "Eco-mode" function can be used to have the stove switch off or on based on the set room temperature.
CONFIGURATION 3
The stove will be controlled (switch on and off) based on the temperature read by the probe in the storage tank.
CONFIGURATION 4
The stove will switch on based on the temperature read by the probe in the storage tank, and will switch off based
on the stove return temperature.
INSTALLATION MANUAL
INSTALLATION
4 following the instructions shown in paragraph 6.3.
buttons to scroll the submenu;
- cod. 004771060 - 09/2011 - Palazzetti - PN - Italy
buttons;
;
41/140