Festo DGC Serie Instrucciones De Utilizacion página 34

DGC−...
Fastening the work load
Place the work load so that the tilting
S
torque of force F parallel to the movement
axis and the lever arm a remains low (see
Techical specifications": M
With hard and stiff work loads:
Please note
If the slide becomes bent against a
buckled work load, the service life of
the guide will be reduced.
S Make sure that the mounting surface
of the work load is not bent more than
as follows:
Note the tightening torques when fastening the work load on the slide:
S
DGC−...
8 / 12
18
25 / 32
40
Fig. 17
Work loads with their own guide:
Adjust the guides of the work load and of the DGC−... so that they are exactly
S
parallel.
Only in this way can you avoid overloading on the slide (permitted forces see
Technical specifications").
34
G/GF: 0.03 mm
KF/FA: 0.01 mm
G
M4: 2 Nm
M5: 3.5 Nm
M6: 4.5 Nm
Fig. 15
, M , M ).
x y z
Fig. 16
GF
M5: 3.5 Nm
a
KF
M4: 2.5 Nm
M5: 3.5 Nm M5: 3.5 Nm
M6: 4.5 Nm
Festo DGC−... 0604b English
F