Tabla de contenido
Idiomas disponibles
Idiomas disponibles
MAINTENANCE
Cleaning
the Water
Inlet Filters
If the washer does not fill properly, an error message
will show on the display. The inlet valve filter screens
could be plugged by hard water scale, sediment in the
water supply, or other debris.
NOTE: The inlet screens protect the delicate parts of
the inlet valve from being damaged
by particles that
could enter the valves with the water supply. Operat-
ing the washer with these filters removed could cause a
valve to stick open resulting in flooding and/or property
damage.
@
@
Inlet Filter
O
Turn OFF both water faucets completely. Unscrew
the hot and cold water lines from the back of the
washer.
IMPORTANT: Only use inlet hoses provided
by KEN-
MORE. Aftermarket
hoses are not guaranteed to fit or
function correctly. Other hoses may not tighten correctly
and could cause leaks. Subsequent damage to prod-
uct or property will not be covered under the terms of
the product warranty_ Hoses can be ordered by calling
1-800-4-MY-HOME
_.
Carefully
the filters
from the
valves
remove
water
and soak them in white vinegar
or a lime scale re-
mover, following
the manufacturer's
instructions. Be
careful
not to damage
the filters
while cleaning,
Rinse
before
Press the filters
thoroughly
reinstalling.
back into place.
Before reattaching
the hoses, flushthe hoses and
water lines by running several gallons of water into
a bucket or drain.
24
Capítulos
Tabla de contenido
