Base Ringer Setting; Visual Message Waiting Indicator (Vmwi); Menu Operations - EnGenius FreeStyl 1 Manual De Instrucciones

Re: The memory location is "00" ~ "19".
4. When using the base speed dail, press
key, then enter the 2-digit memory location ("00"~"19").
The base will dial the telephone number accordingly.

Base Ringer Setting

1. You can change the base ringer by following :
2. Base during standby mode, press
or key, the base speaker will emit the varied ringer (up to 8
ringer tones).
3. Press
key to confirm the setting.
4. To adjust the ringer volume, two options can be followed:
a. Base during standby mode, press
b. When incoming call, press
c. When press or key to adjust the volume, the speaker will
emit the loudness of ringer, you can choose the preference.
Re: The loudness level of ringer is "0~4", "0" means ringer "Off".

Visual Message Waiting Indicator (VMWI)

VMWI feature supported the FSK message which received from telephone
line; It will activate a message icon of handset and flash the broadcast LED
of base.
Notes:
1. A subscription to telephone company voice mail service is required.
2. If the handset still indicates the icon even after you have listened all messages,
turn it off by pressing and holding "Caller ID" key on the handset.
key followed by
key twice, followed by
or key.
or key.
~47~

Menu Operations

Menu 1.KeyGuard
2.PhoneBook
3.Sounds
4.Call Settings
5.Phone Settings
6.Base Setting
7.Registration
8.Menu Display
1.Ring Volume
2.Ring Tone
3.Key Voulme
4.Key Tone
1.Dial Prefix
2.Group Setting
3.Call Barring
4.Feature Call
1.PA On/Off
2.Any Key Talk
3.Contrast
4.Backlight
5.Name Tag
6.Language
7.Custom Name
8.Change Pwd
Enter 1.DTMF Duration
Base PIN:****
2.Flash Time
3.Assign Next HS
4.Clear HS
5.Change PIN
6.Auto Hang Up
7.Set Time
1.Register
2.Deregister
Enter Password:
1.Call Settings
----
2.Phone Settings
3.Base Settings
~48~