Phonebook Operations - EnGenius FreeStyl 1 Manual De Instrucciones

Direct transfer from base
1. Press base
key to put the call on hold.
Re:
When call on hold, the base In Use & speakerphone LED
will be flashing.
2. Enter the destination handset ID followed by
the destination handset will ring, press
destination handset
of to pick up the call.
After the call pick up by destination handset, the base
will go back to standby mode automatically.
Indirect transfer from base
If you want to talk to the destination handset before the
call transferred, you can follow with below method:
1. Press the destination handset ID followed by the base
key to intercom the destination handset.
2. Press the destination
or of the
the intercom call, you can now talk to the destination handset.
After the talking, press base
then the destination handset will pick up the held incoming
call.
Notes: If the destination handset does not answer after handset
paging timeout, the call is routed back to the originating handset.

Phonebook Operations

1. You can store up to 50 entries in the phonebook.
Each entry can contain a phone number or handset ID
(up to 26 digits) and a name (up to16 characters).
2. To access the phonebook, press
key, follow by "2"; or press
handset is in standby mode.
3. To add a new entry:
a. Press ADD (Left) soft key.
b. Enter the name when LCD prompts "Name?" Use
key,
or key
handset to answer
to end the intercom call,
Main Menu
MENU (Right) soft
2.PhoneBook
scrolling key while the
SELECT
~39~
DELETE
entered. When completed, press
key to save.
Re: Up to 16 characters can be entered as the
name.
c. You will then be prompted to enter a number for the
name just entered.
Re: Up to 26 digits can be entered as the nunber.
d. After entering the number, press the
soft key to save this entry into phonebook.
e. Enter a phonebook entry without a name, the all
records without name will be placed on top of the
phonebook list.
f. To enter the name, press the corresponding
keypad number one or more times according to the
order of the character on the key.
See table below for a list of available characters
and their orders. For example, press "2" once for
the character "A", twice for "B", etc.
Notes:
1.
When enter a phone number, the cursor automatically advances to
the next digit field. Use
cursor backward or forward to insert or delete (the digit above the
cursor, or left of the cursor if cursor is on the right of the last digit).
2.
When entering a name, the cursor automatically advances to the
next character field if you press a different key for the next character.
If you need to enter consecutive characters from the same key, you
can wait for the cursor to advance or use
to move the cursor backward or forward manually. Also use
(the character above the cursor, or left of the cursor if cursor is on
the right of the last character).
3.
By default, all letters are entered in the upper case. Use the * key to
toggle between upper and lower cases.
4.
A "Pause" entry represents a 1 second delay in dialing the following
BACK
digits, which is useful when calling a sequence of segmented
numbers (e.g., access code, credit card number, auto-attendant
entries, etc.) Pause is entered by pressing the # key twice (LCD
displays P). Entering pause twice (PP) will result in 2 seconds pause
in the dialing.
(Right) soft key to delete the last digit
SAVE (Left) soft
SAVE
or scrolling key to move the
to move the cursor to insert (to the left of the cursor) or delete
~40~
(Left)
or scrolling key
or