Programmable Feature Call - EnGenius FreeStyl 1 Manual De Instrucciones

a. Once turn on the call barring feature, you can key
in the "call barring" code.
Press ADD (Left) soft key then start entering the
call barring code After the number entered, press
SAVE (Left) soft key to save it.
(1) Up to 5 digits can be edit to be call barring code. For
example, if you want to block all call dialing to
Manhanttan, NY area, you can enter 1212 as the call
barring code.
(2) If you base station is adjuct to a PBX system, please
also include that specific number to retrieve the
PSTN tone.
b. Press OPTION to delete or edit the call barring
codes.
c. Up to 5 set of call barring codes can be
programmed.
d. If wants to block all outgoing calls, enter "＊＊＊＊
＊", press
SAVE (Left) soft key to save it, all
outgoing calls will be restricted.

Programmable Feature Call

1. If FreeStyl1 base unit is installed behind a PBX system, it is feasible to
pre-program some feature call along with the PBX's feature code into the
system.
2. Up to 10 most frequently used feature call codes can be pre-
programmed.
3. Name and enter feature call codes:
a. Press MENU (Right) soft key while the handset is
in the standby mode.
b. Press "4", followed by "5" to enter the "Feature Call"
menu.
c. Press ADD (Left) soft key to add a new entry of
feature call.
d. Key in the name of feature call, like editing a
phonebook entry, i.e. "PBX Transfer".
Press SAVE (Left) soft key to confirm.
~43~
e. Key in the feature call code of the correspondence
PBX feature i.e. F＊70.
Press SAVE (Left) soft key to confirm.
Re: "F" represent the Flash signal.
st
f. The 1 feature call and correspondence feature call
code you entered will appear on the LCD screen.
g. Press
OPTION
(Right) soft key to delete or edit the
feature call you programmed into the system.
h. Repeat the same operations to program 2
even more feature call that you will use frequently.
4. Using pre-programmed feature call during the call.
a. Press OPTION (Right) soft key while the handset is
in the talk mode.
b. Press the correspondence number of the feature
call which you want to perform i.e. press "0" to
perform the "PBX Transfer".
Notes:
1.
This feature call would be useful if the FreeStyl 1 base unit is adjunct
to a PBX system,
2.
if you have not pre-programmed any feature call into the system,
only "#.Phonebook" in the OPTION
3.
The FreeStyl 1's programmable feature call may not function with all
PBX or Key phone systems due to the diversity of various proprietary
systems.
nd
and
menu.
~44~