Handset Group Subscription; Call Transfer - EnGenius FreeStyl 1 Manual De Instrucciones

Notes:
1. The base has a 30 second registration timeout starting from
pressing the REG button. The handset has a 12 second
registration timeout starting from the registration or de-
registration option has been selected. The base and handset
will automatically exit registration mode after timeout.
2. Repeat registration or de-registration process if unsuccessful.

Handset Group Subscription

1. Up to nine handset groups (91-99) can be defined and
handsets can decide which group(s) they want to be
in.
2. For example, Group 1 represents the Customer
Service Group, Group 2 represents the Sales Group,
and Group 3 is the Marketing Group. Suppose that
Handset 11 wants to receive incoming rings for all
Sales and Marketing related calls. Then handset 11
will need to "subscribe" to Group 2 and Group 3.
3. Group Selections:
a. Press handset MENU-4 to enter the Call Settings
menu
b. Press number "3", handset enters group setting
menu.
c. Press OPTION soft key and followed by "1" key to
subscribe the group ("9＃", ＃:1~9). Enter 1~9.
d. Repeat for all desired groups.
e. Delete group selections by pressing
key and followed by "2" to Unsubscribe the group.
Notes:
1. The handset can change group affiliations at any time.
2. The base is not responsible for group assignments.
Consequently, it cannot de-subscribe a handset from a group.
Call Settings
3.Group Setting
SELECT
OPTION soft
~37~
3.

Call Transfer

While a telephone call is in progress, you can transfer it between different
handsets or transfer to base.
Direct transfer from handset
1.
Press
2. Press XFER
destination handset ID or
call will be transferred directly.
After the call transferred to destination handset or
Base, the original handset will go back to standby
BACK
mode automatically.
Indirect transfer from handset
If you want to talk to the destination handset or Base
before the call transferred, you can follow with below
method:
1. During the call, press
the destination handset ID or
2.
Press the
press the
call, you can now talk to the destination handset. After
the talking, press
destination handset is able to pick up the incoming call.
After the call transferred to destination handset or
Base, the original handset will go back to standby
mode automatically.
When an outside line or an intercom caller enters a group ID, all
handsets subscribed to this group will ring. The first handset to
answer will establish a link with the caller. Afterward, it is a one-
to-one call, not a one-to-many call.
key to put the call on hold.
(Right) soft key, followed by the
BASE (Left), then the held
key, followed by entering
BASE (Left).
or of the destination handset or
key of base to answer the intercom
to end the intercom call, then the
~38~