Disposal Of The Unit; Prohibitions And Prescriptions - Arneg Sydney 3 TCBM Serie Manual De Instrucciones

Cleaning stainless steel parts
Certain situations may lead to the build-up of rust on steel surfaces:
- steel implements left on surfaces that are damp, lime scaled, not fully rinsed after using chlorine- or
ammonia-based detergents, encrusted with pieces of food, salt/saline solutions, or dry residue from
evaporated liquids.
Recent stains or rust may be cleaned with shampoo or neutral detergents using a sponge or cloth.
Once cleaned, remove all remaining detergent, rinse all surfaces with plenty of water and dry
thoroughly.
For older stains or rust, chemical substances suitable for stainless steel may be applied which contain
25% nitric acid or similar substances.
If stains or rust persist, sand or polish with a stainless steel brush, then clean with detergent and dry
thoroughly.
This may produce surface scratches due to abrasive cleaning.
N.B.Clean Gastronorm containers thoroughly (Fig. 6 Rif. 7) before placing new products on
display.
WARNING! Do not use chlorine-based detergents such as bleach which may corrode
surfaces.
Avoid contact with or inhaling vapours emitted from acid, alkaline or ammonia
products contained in flooring detergents which may oxidise or corrode stainless
steel.

17.Disposal of the unit

The unit must be disposed of in accordance with your country's waste management legislation and in
respect of our environment.
This product is considered by current legislation as special waste. It must therefore be collected
separately and cannot be treated as household waste nor sent to a landfill. The user is responsible for
delivering the product for disposal to the collection centre specified by the local authorities or
manufacturer for the recovery and recycling of materials. This product consists of 75% recyclable
materials. Materials used in construction:
- Stainless steel 18/10 (AISI 304): unit base structure, various fittings
- Iron pipe:
- Galvanized sheet metal
- Tempered glass:
- Cardboard rockwool:
- PVC:

18.Prohibitions and prescriptions

It is recommended that the Installation and Use Manual be read carefully, so that the operator, in the
case of malfunction, is able to provide precise information to Technical Assistanceby telephone.
Before carrying out any maintenance work on the refrigerator unit, please ensure that the electrical
supply is disconnected.
In the case in which the customer notes type of anomaly in unit performance, before worrying and
contacting Customer Assistance, it is very important that the following items are checked:
- Take great care over all working manoeuvres (loading, unloading, cleaning, counter service,
maintenance, etc.). and always apply maximum diligence, using appropriate protective
equipment for the various operations.
- Do not remove protective covers or panels requiring tools for removal.
More specifically, do not remove the cover of the electrical panel. These operations must
always be carried out by qualified operators.
- Check that temperature and relative humidity values are not in excess of specifications.
For this reason it is indispensable to always maintain the air-conditioning, ventilation, and heating
systems in the sales point at maximum efficiency.
- Limit airflow speed to less than 0.2 m/s in proximity to the unit's openings. In particular, it is important
to avoid that air currents and the air conditioning system's air delivery openings are aimed towards
the opening of the units.
- Respect the load limits, always avoiding excessive loading of the unit.
- Periodically check the operating temperature of the unit and that of the foodstuff displayed (at least
twice per day).
05060109 00 01/04/2010
lower frame
internal sheet metal, lower panels, painted panels
edging glass
heat insulation
bumper edges, baseboard closing edge
Sydney 3 TCBM-TCPW
English
21