Description Of Unit; Description Of Function - Sicam COLIBRI BL512 26 ITAS Manual Original

3.5

Description of unit

On the COLIBRI BL512 26" ITAS there are
rotating and moving parts that could injure
fingers and arms.
11
22
20
19
21
18
17
16
1
4
3
2
1
Fig. 1: COLIBRI BL512 26" ITAS
Pos. Name
1 Locking flange rotation pedal
2 Bead breaker pedal
3 Locking jaw pedal
4 Inflation pedal
5 Bead breaking arm
6 Bead breaking arm lever
7 Bead breaker blade
8 Antiabrasive supports
9 Column
10 Cantilever horizontal arm
11 Locking knob
12 Vertical sliding rod
13 Vertical rod locking lever
14 Mounting tool
Sicam srl società unipersonale
13
10
12
14
15
9
6
5
7
8
Function
Locking plate rotation:
+ clockwise (press down the pedal).
+ counter-clockwise (lift the pedal from bottom to top).
Bead breaking arm activation.
Opening and closing of the locking plate jaws.
Operation of the automatic inflation device for tubeless tires.
Bead breaking of the tire from the rim.
Bead breaking arm activation.
Bead breaking.
Tire support for bead breaking operations.
Horizontal flag arm and mounting tool support; compressed air tank for inflation of tube-
less tires, by means of high pressure inflation that positions
the tire bead on the rim edge.
The air tank (compliant to UE 87/404) has a capacity of 18 litres of compressed air.
Horizontal positioning of the mounting tool.
Cantilever arm locking.
Vertical positioning of the mounting tool.
Locking of the vertically sliding rod.
Mounting and demounting of the tire from the rim (with the help of the bead lifting lever).
Product description | COLIBRI BL512 26" ITAS | 23
3.6

Description of function

Below are reported the main functions of the listed
components of the COLIBRI BL512 26" ITAS:
+
Pedal box, comprehends control pedals of the equip-
ment (locking flange rotation pedal, bead breaking
pedal, locking jaws pedal, inflation pedal).
+
Bead breaker, for bead breaking of tires from the
rim; it is made of the bead breaking arm pneuma-
tically operated by a double effect cylinder (fitted
with a special device with three positions which, by
letting the blade open more widely, allows also bead
breaking of particularly wide tires), an arm positi-
oning lever, antiabrasive supports for rim support
during bead breaking phases.
+
Column assembly, made by a column that holds
the components used to demount (and mount) the
tire from the rim: horizontal jib arm (with mounting
lever), vertical sliding rod (with locking knob), moun-
ting tool to demount (and mount again) the tire from
the rim with the help of the bead lifting lever.
+
Locking plate, locking and rotation device (clockwi-
se and counterclockwise) of the rim, pneumatically
driven by 2 cylinders, made of 4 movable sliders
(adjustable for use also with wheels up to 26'') with
locking jaws for the internal and external locking of
the rim.
+
Automatic inflation device for tubeless tires, made
by a compressed air circuit and an instantaneous
opening valve operated by the inflation pedal (the
air comes out from two holes in each jaw, in order to
seat perfectly the bead of a tubeless tire).
en
|
105 890 2010-11-08