Adjusting The Built-In Clock - AND 767F PRO Manual De Instrucciones

Using the Monitor

Adjusting the Built-in Clock

Adjust the clock prior to use.
1. Press and hold the SET button until the year starts blinking.
2. Select the year using the
to set the current year and move to month/day selection. The
date can be set anywhere between the years 2013 and 2059.
3. Select the month using the
button to set the current month and move to day selection.
4. Select the day using the
to set the current day and move to hour/minute selection.
5. Select the hour using the
to set the current hour and move to minute selection.
6. Select the minute using the
or SET button to turn the device off.
q Holding down the
continuously.
Note: After three minutes of non-operation, the device will turn off automatically.
When the clock has not been set, the clock display
indicates dashes as shown to the right.
E-8
or button. Press the SET button
or button. Press the SET
or button. Press the SET button
or button. Press the SET button
or button. Press the START
or button will change the value
- / - -
- : - -
Press and hold
Year
or
Month
Day
or
Hour
Minute
START
or
Turn off
Pressing the START button will
turn the device off anytime.
or
or
or