Selecting A User; Adjusting The Built-In Clock Before Use - AND PREMIUM UB-543 Manual De Instrucciones

Using the Monitor

2. Selecting a User

1. Press the SET button when turning off the device. The indicator or is blinking.
2. Select a user from user and user
START button to turn off the device. After three minutes of non-operation,
the device will turn off automatically.

3. Adjusting the Built-in Clock Before Use

1. Press and hold the
2. Select the year using the
current year and move to month/day selection. The date can be set
anywhere between the years 2010 and 2059.
3. Select the month using the
current month and move to day selection.
4. Select the day using the
day and move to hour/minute selection.
5. Select the hour using the
current hour and move to minute selection.
6. Select the minute using the
to "4. Applying the Cuff".
q Holding down the
q Pressing the START button will turn the device off anytime.
Notes: After three minutes of non-operation, the device will turn off automatically. When the clock has not been set,
for the clock display. When removing the batteries, preset parameters (of clock, user and my C.P.G.) are reset.
using the
SET button until the year starts blinking.
button. Press the
button. Press the
button. Press the
button. Press the
button. Press the
button will change the value continuously.
SET button. Press the
SET button to set the
SET button to set the
SET button to set the current
SET button to set the
SET button to proceed
Turn off
button
SET
User or user
button
START
Press and hold
button
SET
Year
button
button
SET
Month
button
button
SET
Day
button
SET
Hour
button
button
SET
Minute
button
button
SET
The operation proceeds to "6.
The C.P.G Function Switch".
is indicated
-- / --
E-10