Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Welcome Message
Congratulations on purchasing a state-of-the-art A&D blood pressure monitor, one of the most advanced monitors
available today. Designed for ease of use and accuracy, this monitor will facilitate your daily blood pressure regimen.
We recommend that you read through this manual carefully before using the device for the first time.
Preliminary Remarks
q This device conforms to the European Directive 93/42 EEC for Medical Products. This is made evident by the mark
of conformity. (0123: The reference number to the involved notified body)
q The device is designed for use on adults only, not newborns or infants.
q Environment for use. The device is for use in the home healthcare environment.
q This device is designed to measure blood pressure and pulse rate of people for diagnosis.
Precautions
q Precision components are used in the construction of this device. Extremes in temperature, humidity, direct
sunlight, shock or dust should be avoided.
q Clean the device and cuff with a dry, soft cloth or a cloth dampened with water and a neutral detergent. Never use
alcohol, benzene, thinner or other harsh chemicals to clean the device or cuff.
q Avoid tightly folding the cuff or storing the hose tightly twisted for long periods, as such treatment may shorten the
life of the components.
q The device and cuff are not water resistant. Prevent rain, sweat and water from soiling the device and cuff.
q Measurements may be distorted if the device is used close to televisions, microwave ovens, cellular telephones,
X-ray or other devices with strong electrical fields.
q When reusing the device, confirm that the device is clean.
q Used equipment, parts and batteries are not treated as ordinary household waste, and must be disposed of
according to the applicable local regulations.
q When the AC adapter is used, make sure that the AC adapter can be readily removed from the electrical outlet
when necessary.
q Do not modify the device. It may cause accidents or damage to the device.
q To measure blood pressure, the arm must be squeezed by the cuff hard enough to temporarily stop blood flow
through the artery. This may cause pain, numbness or a temporary red mark to the arm. This condition will appear
especially when measurement is repeated successively. Any pain, numbness, or red marks will disappear with time.
q Do not apply the cuff on an arm with another medical electrical equipment attached. The equipment may not
function properly.
q People who have a severe circulatory deficit in the arm must consult a doctor before using the device, to avoid
medical problems.
q Do not self-diagnose the measurement results and start treatment by yourself. Always consult your doctor for
evaluation of the results and treatment.
q Do not apply the cuff on an arm with an unhealed wound.
q Do not apply the cuff on an arm receiving an intravenous drip or blood transfusion. It may cause injury or accidents.
q Do not use the device where flammable gases such as anesthetic gases are present. It may cause an explosion.
q Do not use the device in highly concentrated oxygen environments, such as a high-pressure oxygen chamber or an
oxygen tent. It may cause a fire or explosion.
Capítulos
Tabla de contenido
