Carlson Pet Products EASY CLOSE Manual De Proprietário página 4

Assembling and Installing Your Gate
NOTE: You will notice a slight gap between the gate door latch and the frame. This is not a
defect. Your gate is a pressure mounted gate and this gap will disappear once you tighten
your gate in its opening.
STEP 1
Locate the (4) threaded spindle
rods. Rotate the adjustment wheels
along the threading, eliminating
the gap between the adjustment
wheel and the rubber foot.
STEP 2
Insert the (4) threaded spindle
rods into the holes at each of the
four corners of the gate.
NOTE: The ends of the gate frame are not threaded. The threaded spindle rods should slide
into the end of the frame tubes without any resistance.
ENGLISH
4
ADJUSTMENT WHEEL
RUBBER FOOT