Tabla de contenido
Idiomas disponibles
Idiomas disponibles
AXIS Q7404 Installation Guide
AXIS Q7404 Video Encoder
This installation guide provides instructions for installing a AXIS Q7404 Video Encoder on your
network. For all other aspects of using the product, please see the product User's Manual, available
on the CD included in this package, or from www.axis.com
Installation steps
Follow these steps to install the AXIS Q7404 Video Encoder on your local network (LAN):
1. Check the package contents against the list below.
2. Hardware overview. See page page 4.
3. Install the hardware. See page 5.
4. Assign an IP address. See page 6.
5. Set a password. See page 10.
6. Repeat steps 4 and 5 for each video channel.
Package contents
Item
Axis video encoder models
Power adapter models
Mounting kit
CD
Printed Materials
Installation Guide
Models/variants/notes
AXIS Q7404
Type PS-P
• 4 screws and plugs to mount the encoder to a concrete wall
• 4 surface protection pads
• Terminal block connectors (I/O: 4x 4-pin connector, RS-485/422: 8x 2-
pin connector, Power: 2-pin connector)
AXIS Network Video Product CD, including product documentation,
installation tools and other software
AXIS Q7404 Installation Guide (this document)
Axis Warranty Document
Important!
This product must be used in
compliance with local laws and
regulations.
Page 3
Tabla de contenido
