Installation Steps; Package Contents - Axis M7014 Guia De Instalacion

AXIS M7014/M7010 Installation Guide
AXIS M7014/M7010 Video Encoder
This installation guide provides instructions for installing the AXIS M7014/M7010 video encoder on
your network. For all other aspects of using the product, please see the product's User's Manual,
available on the CD included in this package, or from www.axis.com

Installation steps

Follow these steps to install the AXIS M7014/M7010 on your local network (LAN):
1. Check the package contents against the list below.
2. Hardware overview. See page 6.
3. Install the hardware. See page 7.
4. Assign an IP address. See page 9.
5. Set the password. See page 12.

Package contents

Item
Axis video encoder models
Power adapter models
Mounting kit
CD
Printed Materials
Installation Guide
Models/variants/notes
AXIS M7014
AXIS M7010
AXIS M7014: Type PS-K
AXIS M7010: Type PS-P
AXIS M7014
• 4 screws and 4 plugs to mount the encoder to a concrete wall
AXIS M7010
• 8 screws (for mounting with brackets)
• 2 mounting brackets
• 4 M6x20 screws for mounting in rack
AXIS M7014/M7010
• 4 Surface protection pads
• Terminal block connectors (RS-485/RS-422: 2 x 2-pin connector
for AXIS M7014; 8 x 2 pin connector for AXIS M7010, Power: 2-
pin connector)
AXIS Network Video Product CD, including product documentation,
installation tools and other software
AXIS M7014/M7010 Installation Guide (this document)
Axis Warranty Document
Important!
This product must be used in
compliance with local laws and
regulations.
Page 5