Axis Ip Utility - Single Camera/Small Installation - Axis Q7404 Guia De Instalacion

AXIS Q7404 Installation Guide

AXIS IP Utility - single camera/small installation

AXIS IP Utility automatically discovers and displays Axis devices on your network. The application
can also be used to manually assign static IP addresses.
Note that the computer running AXIS IP Utility must be on the same network segment (physical
subnet) as the AXIS Q7404.
Automatic discovery
1. Check that the AXIS Q7404 is connected to the network and that power has been applied.
2. Start AXIS IP Utility.
3. When the AXIS Q7404 appears in the window, there is one entry for each of its four video
channels (e.g. AXIS Q7404 Channel 1). Double-click an entry to open the home page for that
video channel.
4. See page 10 for instructions on how to set the password.
Set the IP address manually (optional)
Repeat the following steps for each video channel:
1. Acquire an unused IP address on the same network segment as your computer.
2. Select one of the AXIS Q7404 Channels in the list.
3. Click the button
4. Click the Assign button and follow the instructions.
5. Click the Home Page button to access the web pages for the video channel.
6. See page 10 for instructions on how to set the password.
Assign new IP address to selected device and enter the IP address.
Page 7