Packing List - Ryobi RBL26BP Manual De Utilización

3
5
7 5
To start a cold engine:
1. Set the ignition switch to the "I" (ON) position.
2. Press the primer bulb 10 times.
3. Set the choke lever to "FULL" choke position.
4. Squeeze the throttle trigger completely and pull the
starter grip until the engine starts.
5. Do not pull the starter grip more than 8 times.
6. Set the choke lever to "HALF" choke position.
7. Pull the starter grip until the engine starts. Do not pull
the starter grip more than 6 times.
8. Wait 10 seconds
9. Set the choke lever to "RUN" position.
To start a warm engine:
1. Set the ignition switch to the "I" (ON) position.
2. Press the primer bulb 10 times.
3. Squeeze the throttle trigger completely and pull the
starter grip until the engine starts.
4. Do not pull the starter grip more than 8 times.
5. Set the choke lever to "HALF" choke position.
6. Wait 10 seconds
7. Set the choke lever to "RUN" position.
The following signal words and meanings are intended to
explain the levels of risk associated with this product.
Symbol Signal Meaning
DANGER: Indicates an imminently hazardous
situation, which, if not avoided, will
result in death or serious injury.
WARNING: Indicates a potentially hazardous
situation, which, if not avoided, could
result in death or serious injury.
CAUTION: Indicates a potentially hazardous
situation, which, if not avoided, may
result in minor or moderate injury.
English (Original instructions)
2 2
1 1
4 3
6 4
8 6
9 7
6
CAUTION:
DESCRIPTION
1. Upper tube and Bellows tube
2. Throttle trigger
3. Trigger lock
4. On/Off switch
5. Adjustable harness and chest straps
6. Choke dial
7. Lower tube
8. Wide sweeper nozzle
9. Nozzle
10. Primer bulb
11. Quick release fastening
ASSEMBLY

PACKING LIST

Blower
Blower tube
Adjustable harness and chest straps
Bottle of 2-stroke lubricant
Operator's manual
Figure sheet
Clamp
UNPACKING
This product requires assembly.
Carefully remove the tool and any accessories from
the box.
Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
product.
If any parts are damaged or missing do not operate
this product until the parts are replaced.
ADJUSTING HARNESS AND CHEST STRAPS
Make all adjustments to the harness straps before
starting the blower to avoid the possibility of injury.
12
(Without safety alert symbol)
Indicates a situation that may result
in property damage.
CAUTION