1.
Safety information
1.1
Intended use
The RODIADRILL CERAMIC diamond wet drill is suitable for freehand drilling up to 30 mm. A
ROTHENBERGER centering aid can be used as an optional accessory. The drill holes that are
created have smooth walls. The valid regulations are to be observed for plugging. Persons under
the age of 16 are not to use the equipment.
1.2
Safety information
Please be sure to read and understand the general safety information in the addendum on
safety (from page 88 onward).
Please wear hearing protection. Exposure to noise can lead to loss of hearing.
The fitted friction clutch is only triggered following a jerky blockage. For this reason please
always use the additional hand grip.
Power sockets in outside areas must be fitted with residual current circuit-breakers. This is an
installation regulation requirement for your electric system. Please be sure to observe this when
using the equipment.
Always wear protective goggles when working with the equipment. We recommend protective
gloves, sturdy, non-slip shoes and an apron.
Shavings or chips must not be removed when the equipment is running.
Dust that arises during work is often harmful to health and should not be allowed to enter the
body. Please wear a suitable dust protection mask.
Please remove the plug from the electric socket before all work on the equipment.
Be sure the equipment is switched off before connecting it to the electric socket.
Always keep the connecting cable away from the sphere of action of the equipment. Always
guide the cable away from the equipment to the rear.
Please look out for electric cables, gas and water pipes when working on the wall, ceiling or
floor.
Protect the equipment against splash water. Do not work over head!
2.
Technical data
Nominal acceptance power
Speed
Bore diameter
Tool fitting
Weight
Vibration
Typical A-rated sound level
Noise pressure level 91 dB(A)
Sound power level
Drill bit types
Wear hearing protection! Measured values determined in accordance with EN 50 144.
Personal protection coupling: yes, electronic speed regulation
800 W
1. Gear
3600 1/min
Ø 20 - 67 mm
Quick change adapter with R 1/2" fitting
3.4 kg
2.6 m/s²
100 dB(A)
High Speed Plus, from FF44806 - FF44867
ENGLISH
2. Gear
6400 1/min
Ø 6 - 18 mm
9