Adjusting The Camera Angle; Adjusting The Focus - JVC TK-C205VP Manual De Instrucciones

Installation and connection

Adjusting the Camera Angle

Camera angle, zoom and focus are adjusted.
Horizontal
Lock screw
50˚
Vertical rotation
Rotation levers
Tilt lock screws
E-14
Variable
range 350˚
LENS
CENTER
FOCUS ADJ.
Switch
80˚
Zoom ring
Focus ring
Horizontal rotation
(adjustable range: 350°)
1.
Loosen the horizontal LOCK screw.
2.
Holding the both tilt lock screws, rotate
horizontally.
3.
Tighten the horizontal LOCK screw.
Vertical rotation
(adjustable range: +80°, -50°)
1.
Loosen the tilt lock screws.
2.
Holding the rotation levers, rotate
vertically.
3.
Tighten the tilt lock screws.
Image inclination
(adjustable range: ±15°)
Manipulate the rotation levers to adjust the
inclination of the image.
Adjusting the image size
Adjust the size using the zoom ring.

Adjusting the focus

Adjust using the focus ring.
1.
Adjust the Iris level adjustment prop-
erly
2.
Turn on the Focus ADJ. This will adjust
the proper exposure to be narrow depth
of focus by the electronics shutter of
CCD (AES) and that find out the opti-
mized focus point easier.
3.
Adjust the focus adjustment properly.
If an installation is made in the daylight,
use ND filter or a dark sunglass for a
fine adjustment.
4.
After focus adjustment, Turn off the
Focus ADJ.