Mounting The Base To The Ceiling - JVC TK-C205VP Manual De Instrucciones

Installation and connection

Mounting the Base to the Ceiling

Remove the camera unit from the base and mount the base to the pipe.
• Do not remove the protective sheet affixed to the dome cover until installation work is
completed.
Removing the sheet during installation may result in scratching of the dome cover.
1.
Dome
cover
2.
3.
Silica gel
E-10
Wrench
Base
Camera unit
Lug plate
1.
Remove the dome cover from the
base
Loosen the Tamper-resistant screws fix-
ing the dome cover (3 locations) by us-
ing the provided wrench and turning
counterclockwise.
2.
Remove the camera unit from the
base
Loosen the screws on the camera unit
in the order of
the camera unit from the base.
MEMO
Dome cover and camera unit are connected
by the safety cable and base.
3.
Insert the included Silica gel
Insert the provided silica gel in the Base
interior and hold using the lug plate.
MEMO
• Always replace the silica gel when recon-
necting/resetting during repair or mainte-
nance.
When replacing, use:
JVC parts No. LW40500-001A
CAUTION
• When performing installation under rain-
ing conditions, take caution as not to al-
low rain to enter inside the unit.
• Always use the provided silica gel. When
not using the silica gel, the dome cover
of the camera lens may cloud as a re-
sult.
and and remove