Stihl TS 460 Cutquik Manual De Instrucciones página 39

English / USA
Definitions
1. Rear handle
Carrying handle for the right hand.
2. Air filter
Prevents dust and impurities from
entering the carburetor.
3. Wing nut on filter cover
For removing the filter cover in order
to clean the filter.
4. Throttle trigger interlock
Must be pressed in order to activate
the throttle trigger.
5. Throttle trigger
Controls the engine speed.
6. Choke lever
Enriches the fuel mixture and
makes the engine start more easily.
7. Slide control
For starting, normal operation and
stopping. Keeps the choke partly
open when starting and switches off
the ignition in order to stop the
engine.
8. Spark plug terminal
Connects the spark plug to the
ignition lead.
38
9. Front handle
Handle for the left hand at the front
of the cut-off machine.
10. Guard for the abrasive wheel
Protects the abrasive wheel and
deflects sparks.
11. Front thrust plate
Distributes the clamping pressure of
the retaining nut uniformly over the
abrasive wheel.
12. Abrasive wheel
May be either a composite wheel or
a diamond wheel.
13. Decompression valve
Makes starting easier.
14. Adjusting lever
For adjusting the guard so that
sparks are deflected to the front.
15. Muffler
Reduces the exhaust noise from the
engine and discharges the exhaust
gases.
16. Tensioning nut
For tensioning the V-belt
17. Starter handle
Handle for starting the engine.
18. Filler cap
Seals the fuel tank.
Clutch
Connects the engine and V-belt pulley
when the engine is accelerated beyond
its idling speed (not illustrated).
V-belt pulley
Pulley for driving the V-belt and abrasive
wheel (not illustrated).
TS 460